Adapter for Brew King 5 Liter Mini Keg

The Mini Keg Adapter allows you to use the Tap-a-Draft System with the aluminum Mini Kegs. TAP-A-DRAFT is an easy to use, beverage dispensing system that uses standard food grade disposable CO2 cartridges to regulate the mini keg, keeping beverages carbonated. As the beverage is dispensed, the cartridges replace the vacant space in the mini keg with CO2. This regulated pressure allows the mini keg contents to flow effortlessly from the easy-to-use tap. Utilizes 8-gram CO2 cartridges.

Instructions:
This food grade plastic adapter will allow you to use the Tap-A-Draft dispensing regulator to dispense from a Mini Keg. Fill mini keg and prime with 1 Tablespoon priming sugar per keg, leaving an inch of headspace. Seal keg with two piece reusable bung. Allow beer to carbonate naturally at room temperature. (Approx. 7 - 14 days) When ready to dispense screw your Tap-A-Draft dispensing regulator into the adapter (for best results, wrap threaded end of adapter with teflon tape prior to screwing on the regulator), and then push the assembled adapter into the bung. You will now be able to use the Tap-A-Draft head in the horizontal position to dispense the keg. After dispensing the first beer place the CO2 cartridge in the dispensing unit to keep the mini keg pressurized.
 

For the balance of your kegs simply prime and seal with reusable bung and follow the above instructions.