Bottle Filler - 4 Spout Gravity

Gravity BOTTLE FILLER1) Initial setup. Sanitize the filling machine and all tubing with a quality sanitizing solution and rinse if needed. The vessel containing the wine must be placed above the filling machine. Wine flows into the tank through the inlet and feeds the tank. The tank contains a float which rises as a consequence of the wine flowing into the tank. This process lasts until the valve of the float closes the wine-feed pipe.2) Setting up the fill tubes. It should be made at the beginning of the operation, by lowering each single tube and sucking wine through the tube at the lower end.3) Filling operation. After setting up the fill tubes they can be inserted into a bottle neck. The necks of the bottles need to be laid in the special slots and fastened with the safety hooks.4) Bottle fill level. The filling level of each bottle can be adjusted by raising or lowering the bottle holder after loosening the screws.Bottles will quickly fill up one after the other until the vessel containing the wine is empty.Depending on the size of the bottles, a block may be set under the bottle to keep it from tipping while the neck is locked in the bottle holder.Parts1) Cover2) Inlet Wine Feed3) Tank4) Stop Valve5) Steel Rod With Plug6) Spring7) Tension Rod for Springs8) Screws9) Bottle Holder10) Safety Hook11) Neck Slots12) Fill Tube13) Float