Sam Adams LongShot Contest WLP099 Super High Gravity Ale Yeast
Product Description
White Labs Ready to Pitch Yeast
Each vial of White Labs liquid yeast is designed to be used directly in 5 gallons, hence the term "pitchable yeast." Each vial is equivalent in cell count to a pint starter, or 75-150 billion cells. One vial will usually start fermentation in 5 gallons in 5-15 hours at 70°F. If a faster start is desired, or if initial gravity is over 1.070, we recommend a 1-2 pint starter be made.
WLP099 HIGH GRAVITY ALE YEAST: Can ferment up to 25% alcohol. From England.
Brewers Notes:
Flavors from this yeast vary greatly with the beer produced. The higher the gravity, the more winey the result. Beers over 16% ABV begin to taste less like beer, and more like fortified wines. With low gravity beers, this yeast produces a nice, subtle English ale-like ester profile. As the gravity increases, some phenolic character is evident, followed by the winey-ness of beers over 16% ABV. Most fermentations will stop between 12-16% ABV unless these high gravity tips are performed:
- Brewers Notes:
- Aerate very heavily, 4 times as much as with a normal gravity beer. Less oxygen dissolves into solution at high gravity.
- Pitch 3-4 times as much yeast as normal.
- Consider aerating intermittently during the first 5 days of fermentation. This will help yeast cells during a very difficult fermentation. Aerate with oxygen for 30 seconds or air for 5-10 minutes.
- Higher nutrient levels can allow yeast to tolerate higher alcohol levels. Use 2 times the normal nutrient level. This is especially important when using WLP099 to make wine and mead, which have almost no nutrient level to begin with.
- Do not start with the entire wort sugar at once. Begin fermentation with a wort that would produce a 6-8% beer, and add wort (it can be concentrated) each day during the first 5 days. This can be done together with aeration. This is mandatory if the reported 25% ABV is to be achieved.
More Info:
Directions for Use: Store in refrigerator until use, do not freeze. Remove 2 hours prior to addition and let warm to room temperature (~70°F). This makes re-suspension in the vial easier, and prevents a temperature shock when added to wort. Remove the shrink wrap on cap, shake the vial well to re-suspend yeast, and open cap carefully. Pour into fresh, aerated wort (by shaking fermentor for 15 minutes or injection though an aeration stone) at 70-75°F. The first sign of fermentation will be a raised airlock, then wisps of foam will start to cover the top of the wort. A full, thick krausen will be evident 1-2 hours after this. Be careful to leave enough head space in the fermentor, or use a blow off tube because some fermentations will be very active.









