Chugger Stainless Brew Pump CPSS-CI-2 (230V)

Chugger Pumps are the most economical brewing pump on the market. All the materials are FDA food compliant and the components are UL Recognized.

This is the Center Chugger SS Center Inlet Pump 3/4" Inlet x 1/2" outlet. Designed and built by fellow homebrewers, these pumps provide an excellent addition to any brew setup. 7-8 Gallon flow per minute makes Chugger Pumps one of the industrys top performers!

This low velocity pumps is magnetic driven and therefore should not be run dry. The pump requires the pump head and lines to be full before the pump is started.

CPSS-CI-2 316 STAINLESS STEEL (Front Housing). 316 Stainless Steel (Rear Housing) which contains a 2 7/8 diameter Ryton/Teflon Impeller designed to increase head pressure.  Teflon (Thrust Washer). Clear Silicone (O-Ring) to prevent contamination from dyes in your brew. A ridge is also built into the casing to securely hold o-ring and prevent sealing problems.4 Phillips Head screws hold both front housing and back housing making for easy assembly and disassembly.

Inlet 3/4" MPT & Outlet 1/2" MPT

Features:

·         Max Flow: 7 GPM 26.5 LPM

·         Max Head: 18.6 FT 4.1 M

·         Power: 1/20 HP (.04 HP) .029 KW

·         Electrical: 230V 50/60HZ

·         Non-Submersible

·         Motor AMP Rating Full Load Amps (FLA)

·         Motor and Pump: 1.4 Amps

·         Can handle liquids of 250 F

·         Materials are FDA Food Compliant

·         Components are UL Recognized

·         UPC: 852575006242

·         55" Cord Without Plug   

Max Flow 7 GPM 22.7 LPM
Max Head 18.6 FT 4.1 M
Power .04 HP .029 KW
Electrical 230V 50/60HZ
Non-Submersible
60HZ 50HZ

Can handle liquids of 250F
Materials are FDA Food Compliant
Components are UL Recognized
DO NOT RUN DRY