Chugger Stainless Brew Pump XCPSS-CI-1 (115V)

Chugger Pumps are the most economical brewing pump on the market. All the materials are FDA food compliant and the components are UL Recognized.

This is the Center Chugger SS Center Inlet Pump 3/4" Inlet x 1/2" outlet. Designed and built by fellow homebrewers, these pumps provide an excellent addition to any brew setup. 

This low velocity pumps is magnetic driven and therefore should not be run dry. The pump requires the pump head and lines to be full before the pump is started.

Features:

•     Full Ported Inlet 3/4" and 1/2" outlet
•     0.04 Horsepower which makes the motor run significantly quieter
•     Easy assembly/disassembly
•     4 Phillips Head screws hold both front housing and back housing
•     Rear casing contains a 2 7/8" diameter impeller which is designed to increase head pressure to 17" head
•     O-Ring is made of a clear silicone to prevent contamination from dyes in your brew
•     Ridge is built into the casing to securely holds o-ring and prevents sealing problems
•     7-8 Gallon flow per minute makes Chugger Pumps one of the industrys top performers!

MPT 316 Stainless Steel (Front Housing)

316 Stainless Steel (Rear Housing)

Teflon (Thrust Washer)

Clear Silicone (O-Ring)

Polysulfone (Impeller)

Max Flow 7 GPM 22.7 LPM
Max Head 18.6 FT 4.1 M
Power .04 HP .029 KW
Electrical 115V 50/60HZ
Non-Submersible
60HZ 50HZ

Can handle liquids of 250F
Materials are FDA Food Compliant
Components are UL Recognized
DO NOT RUN DRY