Monster Mill 3 Steel Rollers & 3/8" shaft

Monster Mill 3 Steel Rollers & 3/8" shaft


Be the first to review this product


Beer Brewing Classes



The 3-Roller Monster is meant to compete and win against the best milling products available. With all the great features of Monster`s already popular MM-2 and the addition of a third roller you`ll be able to achieve the best crush around at a higher throughput speed. The MM-3 crushes all your grain twice with one pass through the mill. It starts with a preliminary crush through the initial fixed gap between the top two rollers and then ends with a pass through the second gap between the drive roller and the bottom third roller. The initial pass slightly flattens the grain and gets it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage.

The MM-3 consists of a 6061 aluminum block frame with three 6` long steel rollers riding on SAE 841 oil impregnated bronze bushings. Monster Mills are crafted with a superior grade of steel that is much harder than what is found on most comparable products and should last almost twice as long. The drive shaft and all the axles are integral to the roller rather than screwed into the ends. With this unique design the mill can be driven clockwise or counter-clockwise. All the axles are 3/8` with minimal freeplay in the bushings. With 20% more roller surface area than our competition you`ll get more throughput with the same drive speed in either direction!

One knurled steel roller is driven by a standard electric drill (not included) to feed the grain through the initial fixed gap of approximately .060` and then through the adjustable secondary gap and crush the grist. Both ends of the non-driven top idler roller ride in bronze bushings that are pressed into the frames while the second idler roller rides in bushings that are offset mounted in an adjustable knob. The knob is held in a fixed position by a set-screw that you can loosen to adjust the mill. This system provides an adjustment range of .065`. Monster knobs are made from 303 stainless steel for excellent durability and are larger in diameter than the competition as well as knurled for a positive grip. We`ve also added a groove in our newest design knobs with a matching rounded head on the thumbscrew that allows for a much better grip on the knob to avoid gap changes while milling and also providing knob retention.

There are two roller material options available for the standard 1.5` mills. They come standard with 1144 alloy steel which offers fantastic wear for home brewers. Plain steel mills kept indoors and used regularly won`t have rust issues. Non climate controlled areas or minimal usage could see some corrosion come up that is easily removed with a wire brush. As an upgrade to 1144 steel we offer 303 Stainless Steel. It will wear just about the same as 1144 steel but will not rust. Recommended for those that live in salty or moist environments and those that want to wet mill.

Additional Info

Additional Info

Origin N/A
Color N/A
Yeast Brand N/A
Super Saver Shipping Yes
Free Shipping Yes


Write Your Own Review

You're reviewing: Monster Mill 3 Steel Rollers & 3/8" shaft

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars